How it is worked out
The volume is length × width × depth for a box, or π × radius² × depth for a round tank, in cubic metres (1 m³ is 1,000 litres). The time is the volume ÷ the net flow: the pump's flow, plus or minus the water still coming in.
The flow to use is the pump's flow at your head, from its curve, not the largest flow on the box. A drainage pump rated at 10 m³/h may give half that when it lifts the water 5 m and pushes it through 30 m of hose.
Useful sizes
- A round tank 2.2 m across, filled 2.6 m deep, holds about 10,000 litres.
- A pool 8 × 4 m with an average depth of 1.4 m holds about 45,000 litres. Pool pumps are sized to turn the water over through the filter within a set number of hours: use the fill time here as the turnover time.
- A basement 10 × 8 m under 30 cm of water holds 24,000 litres.
See drainage pumps, dewatering pumps, pool pumps and JoJo tank pumps.
Frequently asked questions
How long does it take to fill a 5,000 litre tank?
How big a pump do I need to empty a flooded basement?
Why does my pump take longer than the calculator says?
More calculators and guides
- Borehole pump size calculatorTotal head, duty point and a rough motor size from the water level, the lift, the pipe and the flow.
- Pipe friction loss calculatorHead loss in metres and bar, loss per 100 m and the water speed for HDPE and steel pipe.
- Pump cable size calculatorVoltage drop on single and three phase pump cable, and the smallest copper size within 3% or 5%.
- Pressure tank size calculatorTank size from the pump flow and the switch settings, with the drawdown, the pre-charge and starts per hour.
- Solar borehole pump calculatorRough solar array, number of panels and daytime flow from the water a day and the total head.
- Pump running cost calculatorUnits used and the cost a day, a month and a year at your tariff, and the cost per kilolitre pumped.
- Pump unit converterFlow in m³/h, L/min, L/s and gallons; pressure in bar, kPa, psi and metres of head; kW and hp.
- Pump troubleshooting guideNo water, humming, tripping, short cycling, low pressure or sand: the likely causes and what to check.