The factors used
- 1 m³/h = 1,000 litres an hour = 16.67 litres a minute = 0.278 litres a second = 24 m³ a day of round-the-clock pumping.
- 1 US gallon a minute = 0.227 m³/h; 1 imperial gallon a minute = 0.273 m³/h.
- 1 bar = 100 kPa = 14.5 psi = 10.2 m of fresh water. 10 m of head is about 0.98 bar.
- 1 hp (mechanical) = 0.746 kW, so a 1.1 kW motor is about 1.5 hp.
Head in metres is the same for any clear liquid, but a pressure in bar depends on the liquid: a column of slurry heavier than water gives more pressure for the same head.
Frequently asked questions
How many metres of head is 1 bar?
About 10.2 m of fresh water. A pressure gauge reading 3 bar at the foot of a pipe means the water could stand about 30.6 m up it.
How many litres a minute is 1 m³/h?
About 16.7 litres a minute, or 1,000 litres an hour.
More calculators and guides
- Borehole pump size calculatorTotal head, duty point and a rough motor size from the water level, the lift, the pipe and the flow.
- Pipe friction loss calculatorHead loss in metres and bar, loss per 100 m and the water speed for HDPE and steel pipe.
- Pump cable size calculatorVoltage drop on single and three phase pump cable, and the smallest copper size within 3% or 5%.
- Pressure tank size calculatorTank size from the pump flow and the switch settings, with the drawdown, the pre-charge and starts per hour.
- Solar borehole pump calculatorRough solar array, number of panels and daytime flow from the water a day and the total head.
- Tank fill and pump-out time calculatorLitres in a tank, pool, pit or basement, and how long the pump takes to fill or empty it.
- Pump running cost calculatorUnits used and the cost a day, a month and a year at your tariff, and the cost per kilolitre pumped.
- Pump troubleshooting guideNo water, humming, tripping, short cycling, low pressure or sand: the likely causes and what to check.