How the solar array is worked out
Lifting 1 m³ of water by 1 m takes 2.725 Wh of energy (the weight of the water × the height). So the daily energy the water needs is 2.725 × the cubic metres a day × the total head, in watt hours.
The panels must supply that energy, plus the losses of the motor, the pump and the controller (the system efficiency, often 35 to 50% for small solar borehole pumps), plus about 15% for heat, dust and wiring. Divided by the peak sun hours, that is the array size in watts.
A solar pump only pumps while the sun is up, so it must deliver the whole day's water in the sun hours. That daytime flow must not be more than the borehole can give.
Worth knowing
- Store the water, not the electricity: a tank holding two or three days of water is cheaper than batteries and covers cloudy days.
- Peak sun hours change with the season and the place; much of South Africa gets plenty, but winter days are shorter. Size on the month that matters most, often late winter for stock water.
- Many solar controllers can also take a generator or the grid as a backup.
- Panels on a pole near the borehole keep the cable short; a long run from the panels needs a heavier cable.
See solar borehole pumps for the types of pump and controller.
Frequently asked questions
How many solar panels does a borehole pump need?
Does a solar borehole pump work on cloudy days?
Can a solar pump replace a windmill?
More calculators and guides
- Borehole pump size calculatorTotal head, duty point and a rough motor size from the water level, the lift, the pipe and the flow.
- Pipe friction loss calculatorHead loss in metres and bar, loss per 100 m and the water speed for HDPE and steel pipe.
- Pump cable size calculatorVoltage drop on single and three phase pump cable, and the smallest copper size within 3% or 5%.
- Pressure tank size calculatorTank size from the pump flow and the switch settings, with the drawdown, the pre-charge and starts per hour.
- Tank fill and pump-out time calculatorLitres in a tank, pool, pit or basement, and how long the pump takes to fill or empty it.
- Pump running cost calculatorUnits used and the cost a day, a month and a year at your tariff, and the cost per kilolitre pumped.
- Pump unit converterFlow in m³/h, L/min, L/s and gallons; pressure in bar, kPa, psi and metres of head; kW and hp.
- Pump troubleshooting guideNo water, humming, tripping, short cycling, low pressure or sand: the likely causes and what to check.